Big wine drinker? Have old cork coasters lying round? Well, shop those corks because we've found 10 more resourceful ways to apply all of them round your home. Who knew something so simple may be so flexible!
1. Cork Magnets
Gather a few magnet strips, a knife, glue, and a few wine corks. Cut corks in half of lengthwise and them apply Magnet Bonding Adhesives on each magnet strip. Press firmly onto the flat side. And it is all.
2. Drawer Knobs
Gather up some champagne corks, screws, and a screw driver. Remove existing drawer knobs and update them along with your pointed screws. Hold a screw in area with a screwdriver. Next, firmly press a champagne cork towards the screw and twist in a clockwise motion. Do the identical for all of the drawers. Your new drawer knobs are prepared.
Three. Planters
You'll need to collect up a few potting soil, a puncher, paring knife, magnets and tiny succulents. Cut a hollow form inside the center of every cork. Attach magnets into each cork by way of pushing tough. Next, fill the hole hollow with soil after which area a tiny succulent inside every one. Add some drops of water and connect the planters to a steel floor.
4. Jewelry Frame
Looking for methods to set up your rings well? All you want is a body that you like. Paint it. Cut out corks in long circular sizes and fuse into the body. If you want to personalize it a few more, you can wrap the corks to your favorite material.
5. Pinboard
All you want are cork tiles, white paint and brush, painter's tape, and photo putting strips. Apply the tape to the corks and proceed to make stripes. Next, arrange tiles in a pattern and then begin portray. Finally, remove the tape and there you've got it.
6. Mouse pad
All you have to do is cut cork to size then bond them together on top of a piece of thick cork paper. It's better to hold it easy however you may design any form you want.
7. Cork Wall
Have you been seeking out methods to boost your kitchen? Is your kitchen backsplash too ordinary? Well no extra. All you want is a bit of timber reduce out to the exact size of the area you wish to cover up. Next, begin gluing half-reduce corks onto piece of wood until every inch is covered. You can opt to either try a sample design or definitely fasten them in a row formation. When the wooden is completely protected, connect it to the wall and voila!
Eight. Pencil Holder
You'll need a strength drill, cork trivets, and glue. Stick trivets on top of each other and press firmly. Next, using your drill bit, drill out holes and fill every hole with a writing tool.
9. Stool
You will want A LOT of wine and poo corks. All you need to do is truly accumulate all of your corks and enclose them in a breathable and durable mesh cloth.
10. Cork Stamps
Why not make lovable and precise stamps with your corks? All you'll want is a good knife, a sharpie and a bunch of corks. Next, draw anything design you need and then certainly cut around it and slowly chip away any extra timber. Use ink and fill for your designs and voila!